Belt Scale Weighing Controller_Zhengzhou Hikmin Machinery Co.,Ltd.

Belt Scale Weighing Controller

Product Usage :

Belt Weigher Controller apply to bulk measurement in various industries such as power generationcoal industry metallurgy mining harbor chemical and building material industry. it is a weighing controller with a VFD display

We are here to help:Easy ways to get the answers you need.

Belt Scale Weighing Controller

This weighing controller apply to bulk measurement in various industries such as power generation,coal industry, metallurgy, mining, harbor, chemical and building material industry.

◆Use DCS to actualize telecontrol operation.

◆Two kinds of screen to choose, LCD or VFD, wall-mounted type or embedded type to adopt different environment.

◆Corrects zero point, belt deadweight, belt speed and totalization automatically.

◆Adopts all-digital and parameter input setting mode, practicality and analog calibration mode.

◆Functions of malfunction hint, malfunction signal purview choice and stop when alarm.

◆Functions of signal collection, error correction, state judgement, running display, PID regulation, DCS

communication and so on.

◆Adopts flash mode to access data, can save all process parameters automatically when losing power

supply, when turn on the equipment again, the equipment will keep running in the original process parameters that before losing power supply.

◆Adopts high credible elements, combine with advanced anti-jamming technology, stand against highly in static, spark, electromagnetic interference.

Ext.Power supply	AC 220V ±20%, 30W, 50Hz/60Hz
Working temperature	-10-50℃
Humidity	≤95%RH
Dimension	280（W）x 340（D）x 140（H）
Weight	2.5 Kg
linearity	0.01FS
Accuracy	0.1%
Tolerance	0-99999900 t
Flux	0.0020-99999.9 t/h
Division	0.001kg、0.01kg、0.1kg、1kg、0.1t、1t…
Speed pulse	0-3000Hz, 0-24V
Belt width	500-1600mm
Load cell sensitivity	2.0-3.0 mV/VLoad cell excitationLoad cell excitation
Load cell excitation	DC 9V ±1%, 200mA, can connect 4 load cells
Speed sensor model	Photoelectricity /electromagnetism/Hall sensor/approach switch
Speed sensor	DC ≤24V, 50mA
Max.net signal input	≤20mV
Display	128*64 VFD Screen
Modbus Interface	RS232<=1.5m RS485<=1000m
Default baud rate	9600(Baud rate and Communication format optional)
Analog Input	0-20mA, Telecontrol setting the flow signal by DCS interface
Analog Output	(DCS interface) 0-20mA, 2 Ports Port 1 for measure signal ( Flow, speed, load signal optional ) Port 2 for control signal
Digital Input	DC 24V, 3 routes Passive touch signal Programmable input
Digital Output	AC 240V, 7A, 3 routes, Touch Capacity signal Programmable output
Protected class	IP54